Lexmark X862de - Printer Engine Card Assembly Removal

Repair information 4-119
7500-432, -632, and -832
Go Back
Previous
Next
Printer engine card assembly removal
1. Remove the rear RIP card cover. See “Rear RIP card cover removal” on page 4-13.
2. Remove the rear motor cover. See “Rear motor cover removal” on page 4-11.
3. Remove the rear lower cover. See “Rear lower cover removal” on page 4-12.
4. Disconnect all the connectors from the engine controller card assembly (A).
Note: Connectors P405, P414, P416, and P400 have a hook that must be released.
5. Remove the six screws securing the printer engine card assembly (A).
6. Remove the printer engine card assembly (A).
Connector
A
Rear
P418 P407 P406
P404
P403
P408
P405
P410
P422
P409
P419
P420
P421
P412
P401
P400
P416
P413 P417
P414
P415
P411
P402