Repair information 4-229
7500-432, -632, and -832
2000-sheet dual input (TTM)—tray 3 front cable assembly removal
1. Remove the left cover. See “2000-sheet dual input (TTM)—left cover removal” on page 4-218.
2. Remove the tray 3 assembly. See “2000-sheet dual input (TTM)—tray 3 assembly removal” on
page 4-224.
3. Remove the tray 3 front cover. See “2000-sheet dual input (TTM)—tray 3 front cover removal” on
page 4-225.
4. Remove the E-clip with a prying tool securing the tray lift pulley (A) to the tray lift shaft assembly (B).
5. Remove the lift cable pulley (A).
Note: The tray 3 front cables (C) become detached.
6. Remove the tray 3 front cables (C) from the tray lift shaft assembly (B).
To Next Page
Loading...
