2-12 MFP Service Manual
7500-432, -632, and -832
230.00
Paper jam
Check areas
A, E
Sensor (duplex wait) on jam The sensor (duplex wait) is not turned on within the
specified time after the exit2 motor is turned on.
Go to “230.00 Sensor (duplex wait) on jam” on
page 2-48.
230.01
Paper jam
Check area D
Sensor (duplex wait) static
jam
Media remains on the sensor (duplex wait).
Go to “230.01 Sensor (duplex wait) static jam”
on page 2-50.
231.00
Paper jam
Check areas n
A, D
Sensor (registration) on jam
(duplex paper feed)
Sensor (registration) is not turned on within the
specified time after the duplex motor is turned on.
Go to “231.00 Sensor (registration) on jam
(duplex paper feed)” on page 2-50.
231.01
Paper jam
Check areas
A, D
Sensor (registration) on jam
(duplex paper feed)
Sensor (registration) is not turned on within the
specified time after the sensor (duplex wait) is
turned on.
Go to “231.01 Sensor (registration) on jam
(duplex paper feed)” on page 2-52.
241.00
Paper Jam
Check area,
tray 1
Sensor (pre-feed) on jam
(tray 1 feed)
The sensor (pre-feed) tray 1 is not turned on within
the specified time after the tray 1 media feed lift
motor is turned on.
Go to “241.00 Sensor (pre-feed) on jam (tray 1
feed)” on page 2-54.
241.01
Paper jam
Check areas
A, tray 1
Sensor (registration) on
jam (tray 1 feed)
The sensor (registration) is not turned on within the
specified time after the sensor (pre-feed) media
feed unit 1 is turned on.
Go to “241.01 Sensor (registration) on jam (tray 1
feed)” on page 2-55.
242.00
Paper jam
Check area
tray 2
Sensor (pre-feed) on jam
(tray 2 feed)
The sensor (pre-feed) tray 2 is not turned on within
the specified time after the tray 2 media feed lift
motor is turned on.
Go to “242.00 Sensor (pre-feed) on jam (tray 2
feed)” on page 2-56.
242.01
Paper jam
Check area B,
tray 2
Sensor (tray 2 feed-out) on
jam (tray 2 feed)
The sensor (tray 2 feed-out) is not turned on within
the specified time after the sensor (pre-feed) media
feed unit 2 is turned on.
Go to “242.01 Sensor (tray 2 feed-out) on jam
(tray 2 feed)” on page 2-58.
242.02
Paper jam
Check area B
Sensor (registration) on
jam (tray 2 feed)
The sensor (registration) is not turned on within the
specified time after the sensor (tray 2 feed-out) is
turned on.
Go to “242.02 Sensor (registration) on jam (tray 2
feed)” on page 2-60.
242.03
Paper jam
Check area B
Sensor (tray 2 feed-out)
static jam
Media remains on the sensor (tray 2 feed-out).
Go to “242.03 Sensor (tray 2 feed-out) static jam”
on page 2-62.
Error code or
message
Error contents Description/Action
To Next Page
Loading...
