Lexmark X862de - Page 113

Diagnostic information 2-13
7500-432, -632, and -832
Go Back
Previous
Next
243.00
Paper jam
Check area
tray 3
Sensor (pre-feed) on jam
(tray 3 media feed)
The sensor (pre-feed) is not turned on within the
specified time after the tray 3 feed lift motor is
turned on.
TTM equipped machines, go to “243.00 Sensor
(pre-feed) on jam (tray 3 media feed)” on
page 2-62.
2TM equipped machines, refer to the Options
Service Manual.
243.01
Paper jam
Check areas
C, tray 3
Sensor (tray 3 feed-out) on
jam (tray 3 media feed)
The sensor (tray 3 feed-out) is not turned on within
the specified time after the pre-feed sensor3 is on.
TTM equipped machines, go to “243.01 Sensor
(tray 3 feed-out) on jam (tray 3 media feed)” on
page 2-64.
2TM equipped machines, refer to the Options
Service Manual.
243.02
Paper jam
Check areas
A, B
Sensor (tray 2 feed-out) on
jam (tray 3 media feed)
The sensor (tray 2 feed-out) is not turned on within
the specified time after the sensor (tray 3 feed-out)
is turned on.
TTM equipped machines, go to “243.02 Sensor
(tray 2 feed-out) on jam (tray 3 media feed)” on
page 2-66.
2TM equipped machines, refer to the Options
Service Manual.
243.03
Paper jam
Check area B
Sensor (registration) on jam
(tray 3 media feed)
The sensor (registration) is not turned on within the
specified time after the sensor (tray 3 feed-out) is
turned on.
TTM equipped machines, go to “243.03 Sensor
(registration) on jam (tray 3 media feed)” on
page 2-67.
2TM equipped machines, refer to the Options
Service Manual.
243.04
Paper jam
Check area C
Sensor (tray 3 feed-out) static
jam
Media remains on the sensor (tray 3 feed-out).
TTM equipped machines, go to “243.04 Sensor
(tray 3 feed-out) static jam” on page 2-69.
2TM equipped machines, refer to the Options
Service Manual.
244.00
Paper jam
Check areas
C, tray 4
Sensor (tray 4 feed-out) on
jam (tray 4 media feed)
The sensor (tray 4 feed-out) is not turned on within
the specified time after the sensor (pre-feed) is
turned on.
TTM equipped machines, go to “244.00 Sensor
(tray 4 feed-out) on jam (tray 4 media feed)” on
page 2-70.
2TM equipped machines, refer to the Options
Service Manual.
244.01
Paper jam
Check areas
C, tray 4
Sensor (tray 3 feed-out) on
jam (tray 4 media feed)
The sensor (tray 3 feed-out) is not turned on within
the specified time after the sensor (tray 4 feed-out)
is turned on.
TTM equipped machines, go to
“244.01 Sensor
(tray 3 feed-out) on jam (tray 4 media feed)” on
page 2-73.
2TM equipped machines, refer to the Options
Service Manual.
Error code or
message
Error contents Description/Action