Lexmark X862de - Page 114

2-14 MFP Service Manual
7500-432, -632, and -832
Go Back
Previous
Next
244.02
Paper jam
Check areas
B, C
Sensor (tray 2 feed-out) on
jam (tray 4 media feed)
The sensor (tray 2 feed-out) is not turned on within
the specified time after the sensor (tray 4 feed-out)
is turned on.
TTM equipped machines, go to “244.02 Sensor
(tray 2 feed-out) on jam (tray 4 media feed)” on
page 2-75.
2TM equipped machines, refer to the Options
Service Manual.
244.03
Paper jam
Check area B
Sensor (registration) on jam
(tray 4 media feed)
The sensor (registration) is not turned on within the
specified time after the sensor (tray 4 feed-out) is
turned on.
TTM equipped machines, go to “244.03 Sensor
(registration) on jam (tray 4 media feed)” on
page 2-77.
2TM equipped machines, refer to the Options
Service Manual.
244.04
Paper jam
Check area
tray 4
Sensor (pre-feed) on jam
(tray 4 media feed)
The sensor (pre-feed) is not turned on within the
specified time after the tray 4 feed lift motor is
turned on.
TTM equipped machines, go to “244.04 Sensor
(pre-feed) on jam (tray 4 media feed)” on
page 2-78.
2TM equipped machines, refer to the Options
Service Manual.
244.05
Paper jam
Check areas
C, tray 4
Sensor (tray 4 feed-out) static
jam
Media remains on the sensor (tray 4 feed-out).
TTM equipped machines, go to “244.05 Sensor
(tray 4 feed-out) static jam” on page 2-80.
2TM equipped machines, refer to the Options
Service Manual.
245.00
Paper jam
Check area K,
tray 5
Sensor (tray 5 pre-feed) on
jam
The sensor (tray 5 pre-feed) is not turned on with in
the specified time after the HCF feed lift motor is
turned on.
Refer to the Options Service Manual.
245.01
Paper jam
Check area K
Sensor (tray 2 feed-out) on
jam
The sensor (tray 2 feed-out) on the printer is not
turned on within the specified time after the HCF
feed lift motor is turned on.
Refer to the Options Service Manual.
245.02
Paper jam
Check area B
Sensor (registration) on jam The sensor (registration) on the printer is not turned
on within the specified time after the HCF feed lift
motor is turned on.
Refer to the Options Service Manual.
245.03
Paper jam
Check area K
Sensor (tray 5 feed-out) static
jam
Paper remains on the sensor (tray 5 feed-out).
Refer to the Options Service Manual.
250.00
Paper jam
Check areas
A, MPF
Sensor (registration) on
jam (MPF pick)
The sensor (registration) is not turned on within the
specified time after the MPF pick solenoid is turned
on.
Go to “250.00 Sensor (registration) on jam (MPF
pick)” on page 2-81.
Error code or
message
Error contents Description/Action