Lexmark X862de - Page 115

Diagnostic information 2-15
7500-432, -632, and -832
Go Back
Previous
Next
280.00
Paper jam
Check areas
A
Sensor (bridge unit media
entrance) on jam
Sensor (bridge unit media entrance) is not turned on
within the specified time after the sensor (fuser exit)
in the printer is turned on.
Refer to the Options Service Manual.
280.01
Paper jam
Check area A
Sensor (bridge unit media
entrance) static jam A
Paper remains on the sensor (bridge unit media
entrance).
Refer to the Options Service Manual.
280.02
Paper jam
Check area F
Sensor (bridge unit media
entrance) static jam B
Paper remains on the sensor (bridge unit media
entrance).
Refer to the Options Service Manual.
281.00
Paper jam
Check area A
Sensor (bridge unit media
exit) on jam A
Sensor (bridge unit media exit) is not turned on
within the specified time after the sensor (bridge unit
media entrance) is turned on.
At this time, the sensor (fuser exit) in the printer is in
the on state.
Refer to the Options Service Manual.
281.01
Paper jam
Check area F
Sensor (bridge unit media
exit) on jam B
Sensor (bridge unit media exit) is not turned on
within the specified time after the sensor (bridge unit
media entrance) is turned on.
At this time, the sensor (bridge unit media entrance)
is in the on state.
Refer to the Options Service Manual.
281.02
Paper jam
Check area F
Sensor (bridge unit media
exit) on jam C
Sensor (bridge unit media exit) is not turned on
within the specified time after the sensor (bridge unit
media entrance) is turned on.
Refer to the Options Service Manual.
281.03
Paper jam
Check area F
Sensor (bridge unit media
exit) static jam A
Paper remains on the sensor (bridge unit media
exit).
Refer to the Options Service Manual.
282.00
Paper jam
Check area F
Sensor (finisher media
entrance) on jam
Sensor (finisher media entrance) is not turned on
with the specified time after the sensor (bridge unit
media exit) is turned on.
Refer to the Options Service Manual.
282.01
Paper jam
Check areas
F
Sensor (finisher media
entrance) static jam A
Paper remains on the sensor (finisher media
entrance).
At this time, the sensor (bridge unit media exit) is
turned on.
Refer to the Options Service Manual.
283.00
Paper jam
Check areas
G, G4
Sensor (buffer path) on jam A Sensor (buffer path) is not turned on within the
specified time after the sensor (finisher media
entrance is turned on.
Refer to the Options Service Manual.
Error code or
message
Error contents Description/Action