2-216 MFP Service Manual
7500-432, -632, and -832
8 Check the image transfer process.
Check the toner image formed on the drum after the
transfer roll assembly passed.
Is the toner image completely transferred on the media?
Go to step 9. Go to step 10.
9 Check the HVPS.
Replace the HVPS.
Perform a print test.
Does the error continue?
Go to step 10. Problem solved.
10 Check the printer engine card assembly.
Replace the printer engine card assembly.
Perform a print test.
Does the error continue?
Go to step 11. Problem solved.
11 Check the printhead assembly for connection.
Warning: If too much force is applied to the board when
checking it, the printhead could become misaligned.
Are P/J130, P/J620 and P/J406 connected properly?
Replace the RIP
card assembly.
Go to “RIP card
assembly
removal” on
page 4-130.
Replace the
connections.
Step Check Yes No
To Next Page
Loading...
