3-4 MFP Service Manual
7500-432, -632, and -832
INPUT TRAY TESTS
Feed Tests See “Feed Tests” on page 3-10.
Sensor Test See “Sensor Test (input tray)” on page 3-11.
OUTPUT BIN TESTS
Feed Tests See “Feed Tests (output bins)” on page 3-12.
Feed To All Bins See “Feed To All Bins” on page 3-12.
Sensor Test See “Sensor Test (output bin)” on page 3-13.
FINISHER TESTS
Staple Test See “Staple Test” on page 3-13.
Hole Punch Test See “Hole Punch Test” on page 3-14.
Feed Tests See “Feed Tests (Finisher)” on page 3-14.
Sensor Tests See “Sensor Test (Finisher)” on page 3-14.
BASE SENSOR TESTS See “BASE SENSOR TEST” on page 3-16.
Cover and Door
Devices
Exit Level
Media Path
DEVICE TESTS See “DEVICE TESTS” on page 3-17.
Quick Disk Test
Disk Test/Clean
PRINTER SETUP
Defaults See “Defaults” on page 3-19.
Printed Page Count See “Printed Page Count” on page 3-20.
Permanent Page Count See “Permanent Page Count” on page 3-20.
Serial Number See “Serial Number” on page 3-20.
Engine Setting 1 to 16 See “Engine Setting 1 to 16” on page 3-20.
Model Name See “Model Name” on page 3-20.
Configuration ID See “Configuration ID” on page 3-20.
Edge to Edge See “Edge to Edge” on page 3-21.
Enable Edge to Edge Copy See “Enable Edge to Edge Copy” on page 3-21.
EVENT LOG
Display Log See “Display the Event Log” on page 3-22.
Print Log See “Print the Event Log” on page 3-24.
Clear Log See “Clear the Event Log” on page 3-24.
REPORTS See “REPORTS” on page 3-22.
SCANNER TESTS
ASIC Test See “ASIC Test” on page 3-25.
Feed Test See “Feed Test” on page 3-25.
Scanner Manual Registration See “Scanner Manual Registration” on page 3-26.
Sensor Tests See “Sensor Test (Scanner Tests)” on page 3-31.
ENGINE ADJUST
Exit Diagnostics Menu See “Exiting Diagnostics Menu” on page 3-32.
To Next Page
Loading...
