Diagnostic aids 3-15
7500-432, -632, and -832
Available Bin Level Sensors
Available Media Path 1 Sensors
Available Media Path 2 Sensors
Available Punch and Staple Sensors
Sensor Name Description
Fin upper bin full Sensor (upper media bin full)
Stacker bin level1 Sensor (stacker bin level 1)
Stacker bin level2 Sensor (stacker bin level 2)
Stacker bin upper limit Sensor (stacker bin upper limit)
Stacker bin no media Sensor (stacker bin no media)
Stacker bin level encod Sensor (stacker bin level encoder)
Sensor Name Description
Bridge media entrance Sensor (bridge media entrance)
Bridge media exit Sensor (bridge unit exit)
Finisher media enter Sensor (finisher media enter)
Buffer path Sensor (buffer path)
Upper media exit Sensor (upper media exit)
Lower media exit Sensor (lower media exit)
Compiler media in Sensor (complier media in)
Sensor Name Description
Diverter gate Sensor (diverter gate)
Front tamper hp Sensor (front tamper HP)
Rear tamper hp Sensor (rear tamper HP)
Eject clamp hp Sensor (media eject clamp HP)
Media eject shaft hp Sensor (media eject shaft HP)
Sensor Name Description
Punch side reg1 Sensor (punch unit side reg 1)
Punch side reg2 Sensor (punch unit side reg 2)
Punch box set Sensor (punch waste box set)
Punch waste full Sensor (punch waste box full)
Low staple Sensor (low staple)
Punch carriage shift hp Sensor (punch carriage shift HP)
Punch unit hp Sensor (punch unit HP)
Stapler carriage shift hp Sensor (stapler carriage HP)
Punch cam front Sensor (punch unit cam front)
Punch hole select Sensor (punch hole select)
To Next Page
Loading...
