Repair information 4-171
7500-432, -632, and -832
15. Remove the ADF media feed assembly (G) from the ADF.
Note: The plunger in the inverter solenoid assembly (F) will become detached.
Note: Before reinstalling the ADF media feed assembly (G), ensure that the harnesses are reinserted into
their appropriate clamps.
Note: Ensure that the plunger is properly reinserted into the inverter solenoid assembly (F).
Note: Ensure that all connections are properly reconnected.
Note: When replacing the complete ADF media feed assembly, first remove the ADF left cover assembly
and the ADF registration motor from the replacement part.
P758
P786
P755
P785
P761
P754
A
Clamp
B
Set screw
Connectors
D
F
Connectors
P758
P786
P755
P785
P761
P754
A
Clamp
G
B
E
Connectors
D
F
Clamps
Front
Rear
To Next Page
Loading...
