Lexmark X862de - Page 672

4-292 MFP Service Manual
7500-432, -632, and -832
Go Back
Previous
Next
8. Disconnect the connector of the harness from duplex drive motor assembly (D) to the duplex main cable
assembly.
9. Release the harness from the clamps of the duplex unit assembly.
10. Remove the three screws securing the bracket (E) to the duplex unit assembly.
11. Remove the bracket (E).
12. Remove the two duplex drive gears 33/74T (G).
13. Release the hooks securing the three duplex drive gears 28T (F) to the duplex unit assembly.
14. Remove the three duplex drive gears 28T (F).
E
Rear
F
F
Hook
F
G
G
Clamps
D
Connector