Lexmark X862de - Page 678

4-298 MFP Service Manual
7500-432, -632, and -832
Go Back
Previous
Next
8. Disconnect the connector of the harness from the duplex drive motor assembly (D) to the duplex main
cable assembly.
9. Release the harness from the clamps of the duplex unit assembly.
10. Remove the three screws securing the bracket (E) to the duplex unit assembly.
11. Remove the bracket (E).
12. Remove the two duplex drive gears 33T (F).
F
D
E
Rear
Clamps
F
Connector