Lexmark X862de - Page 834

I-2 MFP Service Manual
7500-432, -632, and -832
Go Back
Previous
Next
INPUT TRAY TESTS
Feed Tests
3-10
Sensor Test 3-11
MOTOR TESTS 3-5
OUTPUT TRAY TESTS
Feed Tests
3-12
Feed To All Bins 3-12
Sensor Test 3-13
PRINT TESTS 3-6
PRINTER SETUP 3-19
Configuration ID 3-20
Defaults 3-19
Edge to Edge 3-21
Enable Edge to Edge Copy 3-21
Engine Setting 1 to 16 3-20
Model Name 3-20
Permanent Page Count 3-20
Printed Page Count 3-20
Serial Number 3-20
REPORTS 3-22
SCANNER TESTS
ASIC Test
3-25
Feed Test 3-25
Scanner Manual Registration 3-26
Scanner manual registration factory defaults 3-30
Sensor Test 3-31
Dial Pause button 2-4
duty cycle 1-3
E
emulation 1-2
error code messages 2-11
error codes
200.00 sensor (registration) off jam (too long)
2-36
200.01 sensor (registration) static on jam 2-37
201.00 sensor (fuser exit) on jam 2-38
202.00 sensor (fuser exit) off jam 2-39
202.01 sensor (fuser exit) off (too short) jam 2-40
202.02 sensor (fuser exit) static jam 2-41
203.00 sensor (exit 2) on jam 2-41
203.01 sensor (exit 2) off jam 2-43
203.02 sensor (exit 2) on jam in standard bin or finisher
2-45
203.03 sensor (exit 2) static jam 2-46
230.00 sensor (duplex wait) on jam 2-47, 2-48
230.01 sensor (duplex wait) static jam 2-50
231.00 sensor (registration) on jam (duplex paper feed)
2-50
231.01 sensor (registration) on jam (duplex paper feed)
2-52
241.00 sensor (pre-feed) on jam (tray 1 feed) 2-54
241.01 sensor (registration) on jam (tray 1 feed) 2-55
242.00 sensor (pre-feed) on jam (tray 2 feed) 2-56
242.01 sensor (tray 2 feed-out) on jam (tray 2 feed)
2-58
242.02 sensor (registration) on jam (tray 2 feed) 2-60
242.03 sensor (tray 2 feed-out) static jam 2-62
243.00 sensor (pre-feed) on jam (tray 3 media feed)
2-62
243.01 sensor (tray 3 feed-out) on jam (tray 3 media
feed)
2-64
243.02 sensor (tray 2 feed-out) on jam (tray 3 media
feed)
2-66
243.03 sensor (registration) on jam (tray 3 media feed)
2-67
243.04 sensor (tray 3 feed-out) static jam 2-69
244.00 sensor (tray 4 feed-out) on jam (tray 4 media
feed)
2-70
244.01 sensor (tray 3 feed-out) on jam (tray 4 media
feed)
2-73
244.02 sensor (pre-feed) on jam (tray 4 media feed)
2-75
244.03 sensor (registration) on jam (tray 4 media feed)
2-77
244.04 sensor (pre-feed) on jam (tray 4 media feed)
2-78
244.05 sensor (tray 4 feed-out) static jam 2-80
250.00 sensor (registration) on jam (MPF pick) 2-81
290.00 switch (sheet through) static jam 2-83
290.01 sensor (sheet through) on jam 2-83
290.02 sensor (ADF pre-registration) on jam ADF
simplex side
2-86
290.03 sensor (ADF pre-registration) off jam 2-88
290.10 sensor (ADF pre-registration) static jam 2-90
290.11 sensor (ADF registration) on jam ADF simplex
side
2-91
290.12 sensor (ADF registration) on jam side 2-93
290.13 sensor (ADF registration) off jam 2-95
290.14 sensor (ADF inverter) on jam (inverting) 2-97
290.15 sensor (ADF registration) off jam (inverting)
2-99
290.21 sensor (ADF width APS 1) static jam 2-102
290.22 sensor (ADF width APS 2) static jam 2-103
290.23 sensor (ADF width APS 3) static jam 2-104
291.00 sensor (ADF registration) static jam 2-104
291.01 sensor (ADF inverter) off jam (inverting) 2-105
291.02 sensor (ADF inverter) on jam 2-107
291.03 sensor (ADF inverter) off jam 2-109
294.00 sensor (ADF inverter) static jam 2-112
294.01 sensor (ADF pre-registration) on jam side 2
2-113
294.02 sensor (ADF pre-registration) off jam on
inverting
2-115
295.00 size mismatch jam (mix-size) 2-117
295.01 size mismatch jam (no mix-size) 2-119
295.02 invalid combine size jam 2-120
295.03 too short size jam 2-121
295.04 too long size jam 2-123
298.01 scanner cable missing or unplugged 2-124
841.00 image pipeline ASIC failure 2-124
842.00 scanner communication failure 2-125
842.01 scanner communication failure 2-125
842.02 scanner communication failure 2-126
842.03 scanner communication failure 2-127
842.04 scanner communication failure 2-127
842.10 scanner unit assembly - ADF communication
failure
2-128
842.11 scanner communication failure (by scanner)
2-128