1-72 MFP Service Manual
7500-432, -632, and -832
Exit interface card assembly (located in the printer)
The exit interface card assembly contains a CPU and controls media feed in the exit 2 upon receiving a
command from the printer engine card assembly and sensor/switch information.
Exit 2 left door assembly
The left door assembly detects open/close of the exit 2.
Sensor (exit 2)
The sensor (exit 2) detects whether media is remaining in the exit 2.
Sensor (Standard bin full exit 2)
The sensor (exit 2 standard bin full) detects whether the standard bin is full.
Sensor (exit 2 media shift HP)
The sensor (exit 2 media shift HP) detects the media exit roll assembly position.
To Next Page
Loading...
