3 - 180
Chapter 3 Removal and Replacement Procedures (RRPs)
When installing, be careful in the installing direction.
6) Install the COVER TOP (PL 10.1). (RRP10.4)
When installing, be sure to fit the positioning holes on the COVER TOP to the bosses on
the COVER HSG DUP.
7) Install the COVER LEFT (PL 10.1). (RRP10.9)
When installing, be sure to fit the positioning holes on the COVER LEFT to the bosses on
the COVER HSG DUP.
To Next Page
Loading...
