3 - 200
Chapter 3 Removal and Replacement Procedures (RRPs)
3) Connect the harness connectors to the connectors (P/J70, P/J71, P/J72, P/J73, P/J74 and P/
J75) on the PWBA OCT.
When connecting a harness connector, connect it by securing PWBA OCT with your
hand.
4) Secure the harness connected to the S/W REAR COVER (PL 11.1) using clamp.
5) Install the COVER FRONT (PL 11.1). (RRP11.5)
6) Install the COVER OCT (PL 11.1). (RRP11.4)
7) Install the COVER REAR (PL 11.1). (RRP11.2)
To Next Page
Loading...
