Ricoh C231 - Page 154

SERVICE PROGRAM TABLE
4-18
C231/C237/C238 SM
No. Display Function Settings
Factory
Setting
Comments
151 Machine No. Displays the machine serial
number and the installation
date.
0 Input the serial
number and the
installation
date.
152 Service Tel.
No.
Input the service
representative's telephone
number, which is displayed
with the service call code.
0
•
Use the
number keys
to input the
telephone
number at
installation.
•
Press the
Memory/
Class key if
you wish to
add a hyphen
between the
digits.
153 Last Service
Code
Displays the last service
call.
0
*160 Side Ers.
Adjusts the default side
edge margin width in the
Margin Erase mode.
2 to 20 mm
or
0.1 to 0.8
inch
5 mm
or
0.2”
*161 Center Ers. Adjusts the default center
margin width in the Margin
Erase mode.
4 to 60 mm
or
0.2 to 2.3
inch
10 mm
or
0.4”
*162 Horizontal
Ers.
Adjusts the default
horizontal edge (top and
bottom) margin in the
Margin Erase mode.
2 to 20 mm
or
0.1 to 0.8
inch
5 mm
or
0.2”
*170 ERS. **1 Enter the original size (in
"mm") that you want to use
with the Margin Erase
mode.
(100 to
258) x (100
to 364) mm
or
(4.0 to
10.0) x (4.0
to 14.3 )
inch
0 x 0 The original
size entered is
displayed by
pressing the
Select Size And
Direction ("
∧
" or
"
∨
") keys when
in the Margin
Erase mode.
*171 ERS. **2 Enter the original size (in
"mm") that you want to use
with the Margin Erase
mode.
(100 to
258) x (100
to 364) mm
or
(4.0 to
10.0) x (4.0
to 14.3 )
inch
0 x 0 Same as above