Ricoh C231 - Manual Cut

MANUAL CUT
7-4
SM C53
2
2.3 MANUAL CUT
When the manual cut switch [A] is pressed, the timer starts counting and the drive
motor starts feeding tape. 2,500 milliseconds later, the drive motor reverses to cut
the tape.
If the manual switch is pressed longer than 2,500 milliseconds, the tape continues
to be fed out until the manual switch is released. Afterward, the motor reverses to
cut the tape.
2,500 ms
Forward
Reverse
Start Signal
Timer
Drive Motor
Home Position
Sensor
C532D505.WMF
Start Signal
Timer
Drive Motor
Home Position
Sensor
2,500 ms
Reverse
Forward
C532D506.WMF
[A]