Ricoh C231 - Input;Output Check Mode; Input;Output Check Mode Access Procedure

INPUT/OUTPUT CHECK MODE
4-23
SM C231/C237/C238
Service
Tables
4.4.3 INPUT/OUTPUT CHECK MODE
This program checks the electrical components.
Input/Output Check Mode Access Procedure
1. Access the SP mode. (See the SP mode access procedure.)
2. Enter 130 (for the Input Check mode) or 131 (for the Output Check mode) with
the
number keys
.
3. Press the Enter (#) key.
4. Enter the desired number. (See the Input or Output Check Table.)
NOTE:
The number can be shifted up or down by pressing the
Select Size
And Direction ("
∧
" or "
∨
") keys
.
5. Press the
Enter (#) key
.
NOTE:
In the input check mode, all printing speed LEDs turn on when the
sensor or switch that is being tested is actuated. A beep will also be
heard.
6. For the Output Check mode, press the
Start key
to turn on the component.
7. Press the
Enter (#) key
to return the display to the initial input or output check
menu.
8. Press the
Clear Modes key
to leave the SP mode.