SERVICE PROGRAM TABLE
4-11
SM C231/C237/C238
Service
Tables
4.4.2 SERVICE PROGRAM TABLE
*: Accessible by a customer
No. Display Function Settings
Factory
Setting
Comments
1 This SP number was used to enable the On-line key for some other models. On
this model, the On-line key is enabled automatically when the optional PC
controller is connected, SP number 1 is not used.
2 ADF Unit Enables ADF operation. 0: No
1: Yes
0
3 Key Counter Enables key counter
operation.
0: No
1: Yes
0
4 Key Card Used only in Japan.
0: No
1: Yes
0
*5 Tape Marker
Off
Disables tape marker
operation.
0: No (Use
the tape
marker)
1: Yes
0
*10. Min. Print
Limits the minimum print
quantity that can be
entered.
0 to 9999 0
*11 Max. Print Limits the maximum print
quantity that can be
entered.
0 to 9999 9999
*12 Set Display
Mode
Selects the language used
on the display.
0: Japanese
1: English
2: German
3: French
4: Italian
5: Spanish
6: Chinese
7: Dutch
8: Brazilian
0 to 8 1
*13
Set Size
Mode
Selects the metric size (mm)
or inch size on the display.
0: mm
1: Inch
-
14 Set
Operation
Panel
Selects the expression type
on display that matches the
machine.
0:JPN/CHN
1:OTHER
- Never change
the setting.
15
Set Drum
Size
Selects the drum size that
matches the machine.
NOTE: This function is for
production line use only.
0:B4
1:A4
2:LG
-
Never change
the setting.
16 LCD
Contrast
Adjust
Changes the LCD contrast. 17 to 24 21
To Next Page
Loading...
