Ricoh C231 - Paper Separation Pressure Adjustment

PAPER FEED SECTION
6-26
C231/C237/C238 SM
6.7.2 PAPER SEPARATION PRESSURE ADJUSTMENT
PURPOSE:
To ensure that the friction pad exerts sufficient pressure for smooth
printing paper separation.
Adjust the paper separation pressure by loosening and moving up or down the
adjusting screw [A].
•
Moving the screw up
⇒
Increases the paper separation pressure
•
Moving the screw down
⇒
Decreases the paper separation pressure
Tighten the screw after the adjustment.
NOTE:
As the default, the screw is set at the lowest position.
C231R542.WMF
[A]