Ricoh C231 - Page 294

SERVICE PROGRAM TABLE
C231/C237/C238 4-4 SM
No. Display Function Settings
Factory
Setting
Comments
16
LCD
Contrast
Adjust
Changes the LCD contrast. 17 to 24 21
***17
Not used for the C237 model
**18
Master Type
Selects the master
production district.
0:Overseas
1:Japan
0
Never change
the setting.
***19
Not used for the C237 model
*20
Buzzer On Turns the beeper on. 0: No
1: Yes
0
*21
Prints/Master
Cost
Adjusts the cost ratio of
masters to prints for
accounting purposes.
(When SP4 is set at 1,
This function cannot be
used.)
0 to 50 0 The set
number (0 to
50) is
automatically
added to the
key counter
each time a
master is
used.
22
Home
Position
Adjust
The drum home position
(the master eject position)
changes.
0 to 9 5
Never change
the setting.
23
Plot Position
Adjust
The drum stop position for
the master making changes.
0 to 9 3 Never change
the setting.
*25
Clear 2 In 1
Selects whether to reset the
Combine 2 Original mode
automatically after master
making.
0: No
1: Yes
0
26
Feed Timing
Adjust
Adjusts the registration
motor on timing for better
paper registration.
0 to 7 3
27
ADF Current
Down
Lowers the current to the
ADF motor.
0: No
1: Yes
0 If the ADF
motor vibrates
due to a part
variation
causing noise,
reduce the
motor current
with this
mode.
28
Paste
Shadow
Erase
Adjusts the Paste Shadow
Erase level that can be set
with the key on the
operation panel. The
shadows of pasted-up
edges on originals lighten.
0: Standard
1: Light
2: Lighter
0