Rohde & Schwarz R&S SMW200A - Page 1038

Remote Control Commands
R&S
®
SMW200A
1038User Manual 1175.6632.02 ─ 30
[:SOURce<hw>]:BB:ARBitrary:WAVeform:CLOCk <Filename>, <Clock>
Appends information on the ARB clock rate to specified waveform file. The file must
contain I/Q and/or marker data and have been created with the command :MMEMory:
DATA:UNPRotected on page 858.
Parameters:
<Filename> string
Complete file path and file name with file extension (*.wv).
If the file is in the default directory, the file path can be omitted.
Setting parameters:
<Clock> float
Range: 400 to 100E6
Increment: 1E-3
*RST: 1E6
Example: see :MMEMory:DATA:UNPRotected on page 858
Multi-Segment Commands
Required options
See Chapter 5.10.1, "Required Options", on page 352.
[:SOURce<hw>]:BB:ARBitrary:WSEGment?................................................................... 1038
[:SOURce<hw>]:BB:ARBitrary:WSEGment:NAME?.........................................................1039
[:SOURce<hw>]:BB:ARBitrary:WSEGment:NEXT........................................................... 1039
[:SOURce<hw>]:BB:ARBitrary:WSEGment:NEXT:EXECute............................................. 1039
[:SOURce<hw>]:BB:ARBitrary:WSEGment:NEXT:SOURce..............................................1039
[:SOURce<hw>]:BB:ARBitrary:WSEGment:LMODe.........................................................1040
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:SEGMent:CATalog?......................1040
[:SOURce<hw>]:BB:ARBitrary:WSEGment:SEQuence:SELect.........................................1040
[:SOURce<hw>]:BB:ARBitrary:WSEGment:SEQuence:APPend........................................1040
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CREate.........................................................1041
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CLOad..........................................................1041
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:MARKer:MODE............................1042
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:MARKer:ESEGment..................... 1042
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:MARKer:FSEGment......................1042
[:SOURce<hw>]:BB:ARBitrary:TRIGger:SMODe............................................................. 1042
[:SOURce<hw>]:BB:ARBitrary:WSEGment?
Queries the index of the currently processed segment.
Return values:
<WSegment> integer
Range: 0 to 1023
*RST: 0
SOURce Subsystem