Rohde & Schwarz R&S SMW200A - Page 1067

Remote Control Commands
R&S
®
SMW200A
1067User Manual 1175.6632.02 ─ 30
[:SOURce<hw>]:BB:ARBitrary:TRIGger[:EXTernal]:INHibit <Inhibit>
Specifies the number of samples, by which a restart is inhibited.
Maximum trigger delay and trigger inhibit values depend on the installed options. See
"Specifying delay and inhibit values" on page 242.
Parameters:
<Inhibit> integer
Range: 0 to 21.47 * (clock frequency)
*RST: 0
Default unit: samples
E.g. 0 to 2147483647 samples (R&S SMW-B10)
Example: See Example "Managing waveform files" on page 1020.
Manual operation: See "External / Trigger Inhibit" on page 255
Marker Commands
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:MODE........................................... 1067
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:ONTime.........................................1067
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:OFFTime....................................... 1067
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:PATTern.........................................1068
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:PULSe:DIVider...............................1068
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:PULSe:FREQuency?...................... 1069
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:DELay........................................... 1069
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:DINSec?........................................1069
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:MODE <Mode>
Defines the signal for the selected marker output.
For detailed description of the regular marker modes, refer to "Marker Modes"
on page 232.
Parameters:
<Mode> UNCHanged | RESTart | PULSe | PATTern | RATio
UNCHanged
A marker signal as defined in the waveform file (tag 'marker
mode x') is generated.
*RST: UNCHanged
Example: see Example "Managing waveform files" on page 1020
Manual operation: See "Marker Mode" on page 311
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:ONTime <OnTime>
[:SOURce<hw>]:BB:ARBitrary:TRIGger:OUTPut<ch>:OFFTime <OffTime>
Sets the number of samples in the ON and OFF periods.
SOURce Subsystem