Rohde & Schwarz RTP044 - Page 1210

Remote control commands
R&S
®
RTP
1210User Manual 1337.9952.02 ─ 12
Suffix:
<m>
.
1..4
Selects the input channel.
Parameters:
<Mode> RCONtinuous | RSINgle | AUToset | AZERo | SEToffsettomean |
SITFile | NOACtion | FINDtriglevel | REPort | PROBemode |
PRSetup
RCONtinuous
Run continuous: The acquisition is running as long as the probe
button is pressed.
RSINgle
Run single: Starts a defined number of acquisitions (same as
[Single] key).
AUTOSET
Starts the autoset procedure.
AZero
AutoZero: performs an automatic correction of the zero error.
SEToffsettomean
Set offset to mean: performs an automatic compensation for a
DC component of the input signal.
SITFile
Save Image To File:
Directs the display image to a file. The MMEMory:NAME com-
mand defines the file name. The file format is defined with
HCOPy:DEVice<m>:LANGuage.
NOACtion
Nothing is started on pressing the micro button.
FINDtriglevel
Sets the trigger level automatically to 0.5 * (MaxPeak – Min-
Peak). The function is not available for an external trigger
source.
REPort
Creates and saves a report of the current results.
PROBemode
Only available for R&S RT-ZM probes. Changes the measure-
ment mode of the probe.
PRSetup
Opens the "Probes Setup" dialog box.
*RST:
RCONtinuous
Usage: Asynchronous command
Acquisition and setup