Rohde & Schwarz RTP044 - Page 1672

Remote control commands
R&S
®
RTP
1672User Manual 1337.9952.02 ─ 12
NOEXists: byte does not exist
INSufficient: the frame is not completely contained in the acqui-
sition. The decoded part of the frame is valid.
*RST: OK
Usage: Query only
BUS<m>:LIN:FRAMe<n>:BYTE<o>:VALue?
Returns the value of the specified byte.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
<o> *
Selects the byte.
Return values:
<ByteValue> To set the value format, use FORMat:BPATtern.
The values below – range, increment and reset – are decimal
values.
Range: 0 to 255
*RST: 0
Usage: Query only
22.17.7.4 LIN search settings
In search setup commands, you have to specify the <SearchName> parameter. It is a
string parameter that contains the search definition name. The commands are similar
to LIN trigger commands.
SEARch:TRIGger:LIN:SSOFrame..................................................................................1673
SEARch:TRIGger:LIN:SFIDentifier.................................................................................1673
SEARch:TRIGger:LIN:IDENtifieror................................................................................. 1673
SEARch:TRIGger:LIN:SIDData......................................................................................1673
SEARch:TRIGger:LIN:SERRor......................................................................................1674
SEARch:TRIGger:LIN:WUFRame..................................................................................1674
SEARch:TRIGger:LIN:ICONdition..................................................................................1674
SEARch:TRIGger:LIN:IMIN...........................................................................................1675
SEARch:TRIGger:LIN:IMAX..........................................................................................1675
SEARch:TRIGger:LIN:IDOR<m>:ENABle.......................................................................1675
SEARch:TRIGger:LIN:IDOR<m>[:VALue]....................................................................... 1675
SEARch:TRIGger:LIN:DCONdition.................................................................................1676
SEARch:TRIGger:LIN:DMIN..........................................................................................1676
SEARch:TRIGger:LIN:DMAX........................................................................................ 1676
SEARch:TRIGger:LIN:BORDer......................................................................................1677
SEARch:TRIGger:LIN:DLECondition..............................................................................1677
Protocols