Santerno Sinus Penta - Page 241

PROGRAMMING GUIDE
SINUS PENTA
241/486
P362 MPL2: Testing Variable A
P362 Range
0 ÷ 7
0: >
1: ≥
2: <
3: ≤
4: ABS(x) >
5: ABS(x) ≥
6: ABS(x) <
7: ABS(x) ≤
Default
0
0: >
Level
ADVANCED
Address
362
Function
This parameter defines the test to be performed for the variable detected by
P360 using P364 as a comparing value.
P363 MPL2: Testing Variable B
P363 Range
0 ÷ 7
0: >
1: ≥
2: <
3: ≤
4: ABS(x) >
5: ABS(x) ≥
6: ABS(x) <
7: ABS(x) ≤
Default
0
0: >
Level
ADVANCED
Address
963
Function
This parameter defines the test to be performed for the variable detected by
P361 using P365 as a comparing value.
P364 MPL2: Comparing Value for Test A
P364 Range
–32000 ÷ 32000
–320.00 % ÷ 320.00 %
% of the full-scale value of selected variable A, see
Table
48
Default
0
0
Level
ADVANCED
Address
964
Function
This parameter defines the comparing value with the selected variable for test A.
P365 MPL2: Comparing Value for Test B
P365 Range
–32000 ÷ 32000
–320.00 % ÷ 320.00 %
% of the full-scale value of selected variable B, see
Table
48
Default
0
0
Level
ADVANCED
Address
965
Function
This parameter defines the comparing value with the selected variable for test B.