SINAMICS G120D
List Manual (LH14), 01/2016, A5E33842313
103
2 Parameters
2.2 List of parameters
p0523[0]: parameter number
p0523[1]: parameter number
p0523[2]: parameter number
...
p0523[19]: parameter number
Dependency: Refer to: p0514
Description: Sets the parameters with reference value in p0514[9] for the specific scaling.
p0524[0]: parameter number
p0524[1]: parameter number
p0524[2]: parameter number
...
p0524[19]: parameter number
Dependency: Refer to: p0514
Description: Display and setting the code number of the load gearbox.
Description: Maximum permissible input speed at the load gearbox.
The following applies when calculating the maximum speed (p1082):
- for p0324 = 0 or p0532 = 0 or p0542 = 0, p0322 is used.
- for p0324 > 0, p0532 > 0 and p0542 > 0, the minimum value from the parameters is used.
Description: Maximum permissible input torque at the load gearbox.
p0524[0...19] Scaling specific parameters referred to p0514[9] / Scal spec p514[9]
Access level: 3 Calculated: p0340 = 1 Data type: Unsigned32
Can be changed: T Scaling: - Dyn. index: -
Unit group: - Unit selection: - Func. diagram: -
Min Max Factory setting
0 4294967295 0
p0541[0...n] Load gearbox code number / Load grbx CodeNo
Access level: 3 Calculated: - Data type: Unsigned32
Can be changed: T Scaling: - Dyn. index: MDS
Unit group: - Unit selection: - Func. diagram: -
Min Max Factory setting
0 4294967295 0
p0542[0...n] Load gearbox maximum speed / Load grbx n_max
Access level: 3 Calculated: - Data type: FloatingPoint32
Can be changed: T Scaling: - Dyn. index: MDS
Unit group: - Unit selection: - Func. diagram: -
Min Max Factory setting
0 [rpm] 340.28235E36 [rpm] 0 [rpm]
p0543[0...n] Load gearbox maximum torque / Load grbx M_max
Access level: 3 Calculated: - Data type: FloatingPoint32
Can be changed: T Scaling: - Dyn. index: MDS
Unit group: 7_1 Unit selection: p0505 Func. diagram: -
Min Max Factory setting
0 [Nm] 340.28235E36 [Nm] 0 [Nm]
To Next Page
Loading...
