Siemens SINAMICS G120D CU240D-2 DP - p0544[0...n] Load gearbox overall ratio (absolute value) numerator; Load grbx ratio N; p0545[0...n] Load gearbox overall ratio (absolute value) denominator; Load grbx ratio D; p0546[0...n] Load gearbox output direction of rotation inversion; Load grbx outp inv; p0550[0...n] Brake type; Brake type

2 Parameters
2.2 List of parameters
SINAMICS G120D
104 List Manual (LH14), 01/2016, A5E33842313
Description: Sets the numerator for the overall ratio of the load gearbox.
Description: Sets the denominator for the overall ratio of the load gearbox.
Description: Sets the inversion for the direction of rotation of the load gearbox.
Description: Sets the brake version.
Description: Display and setting the code number of the brake.
Description: Sets the maximum brake speed.
p0544[0...n] Load gearbox overall ratio (absolute value) numerator / Load grbx ratio N
Access level: 3 Calculated: - Data type: Integer32
Can be changed: T Scaling: - Dyn. index: MDS
Unit group: - Unit selection: - Func. diagram: -
Min Max Factory setting
0 2147483647 0
p0545[0...n] Load gearbox overall ratio (absolute value) denominator / Load grbx ratio D
Access level: 3 Calculated: - Data type: Integer32
Can be changed: T Scaling: - Dyn. index: MDS
Unit group: - Unit selection: - Func. diagram: -
Min Max Factory setting
0 2147483647 0
p0546[0...n] Load gearbox output direction of rotation inversion / Load grbx outp inv
Access level: 3 Calculated: - Data type: Integer32
Can be changed: T Scaling: - Dyn. index: MDS
Unit group: - Unit selection: - Func. diagram: -
Min Max Factory setting
0 2147483647 0
p0550[0...n] Brake type / Brake type
Access level: 3 Calculated: - Data type: Unsigned16
Can be changed: T Scaling: - Dyn. index: MDS
Unit group: - Unit selection: - Func. diagram: -
Min Max Factory setting
0 65535 0
p0551[0...n] Brake code number / Brake code no.
Access level: 3 Calculated: - Data type: Unsigned16
Can be changed: T Scaling: - Dyn. index: MDS
Unit group: - Unit selection: - Func. diagram: -
Min Max Factory setting
0 65535 0
p0552[0...n] Maximum brake speed / Brake n_max
Access level: 3 Calculated: - Data type: FloatingPoint32
Can be changed: T Scaling: - Dyn. index: MDS
Unit group: - Unit selection: - Func. diagram: -
Min Max Factory setting
0 [rpm] 340.28235E36 [rpm] 0 [rpm]