Siemens SINAMICS G120D CU240D-2 DP - Fig. 3-74 2858 - Extended Functions via PROFIsafe (9601.2 = 1 and 9601.3 = 1)

SINAMICS G120D List Manual (LH14), 01/2016, A5E33842313
679
3 Function diagrams
3.9 Safety Integrated Extended Functions
Fig. 3-74 2858 – Extended Functions via PROFIsafe (9601.2 = 1 and 9601.3 = 1)
- 2858 -
Function diagram
87654321
fp_2858_97_58.vsd
Safety Integrated Extended Functions
SINAMICS G120D
09.12.2015 V4.7.6
Extended Functions via PROFIsafe (p9601.2 = 1 and p9601.3 = 1)
r9722.0
r9722.1
r9722.4
r9722.7
r9722.9
r9722.10
r9722.12
r9720.0
r9720.1
r9720.4
r9720.7
r9720.9
r9720.10
[2840.5]
[2820.1], [2840.1]
[2820.1], [2840.1]
[2840.4], [2840.1]
[2820.1], [2840.1]
[2819.1], [2840.1]
[2819.1], [2840.1]
Extended Functions
r9722.15
r9722.13
r9720.12
r9720.13
Deselection STO
Deselection SS1
Deselection SLS
Acknowledgment
Select SLS bit 0
Select SLS bit 1
Deselection SDI positive
Deselection SDI negative SSM (n below limit)
SDI neg active
SDI pos active
Active SLS stage, bit 1
Active SLS stage, bit 0
Internal event
SLS active
SS1 active
STO active
PROFIsafe
Communication via
PROFIBUS/
PROFINET
PROFIsafe
Communication via
PROFIBUS/
PROFINET
Safe motion
monitoring
functions
[2824.1], [2840.1]
[2824.1], [2840.1] [2823.7], [2840.5]
[2824.7], [2840.5]
[2824.7], [2840.5]
[2820.7], [2840.5]
[2819.8], [2840.5]
[2819.8], [2840.5]