Siemens SINAMICS G120D CU240D-2 DP - r20204 BO: DFR 1 output Q; DFR 1 output Q; r20205 BO: DFR 1 inverted output QN; DFR 1 inv outp QN; p20206 DFR 1 run-time group; DFR 1 RTG; p20207 DFR 1 run sequence; DFR 1 RunSeq

SINAMICS G120D
List Manual (LH14), 01/2016, A5E33842313
529
2 Parameters
2.2 List of parameters
Description: Display parameter for output Q of instance DFR 1 of the D flipflop.
Description: Display parameter for the inverted output QN of instance DFR 1 of the D flipflop.
Description: Setting parameter for the run-time group in which instance DFR 1 of the D flipflop is to be called.
Value: 1: Run-time group 1
2: Run-time group 2
3: Run-time group 3
4: Run-time group 4
5: Run-time group 5
6: Run-time group 6
9999: Do not calculate
Description: Setting parameter for the run-time group of instance DFR 1 within the run-time group set in p20206.
Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run
sequence value.
Description: Sets the signal source of input quantities I0 and I1 of instance BSW 0 of the binary changeover switch.
Index: [0] = Input I0
[1] = Input I1
r20204 BO: DFR 1 output Q / DFR 1 output Q
CU240D-2_DP
CU240D-2_PN
CU240D-2_DP_F
CU240D-2_PN_F
Access level: 3 Calculated: - Data type: Unsigned32
Can be changed: - Scaling: - Dyn. index: -
Unit group: - Unit selection: - Func. diagram: 7240
Min Max Factory setting
- - -
r20205 BO: DFR 1 inverted output QN / DFR 1 inv outp QN
CU240D-2_DP
CU240D-2_PN
CU240D-2_DP_F
CU240D-2_PN_F
Access level: 3 Calculated: - Data type: Unsigned32
Can be changed: - Scaling: - Dyn. index: -
Unit group: - Unit selection: - Func. diagram: 7240
Min Max Factory setting
- - -
p20206 DFR 1 run-time group / DFR 1 RTG
CU240D-2_DP
CU240D-2_PN
CU240D-2_DP_F
CU240D-2_PN_F
Access level: 3 Calculated: - Data type: Integer16
Can be changed: T Scaling: - Dyn. index: -
Unit group: - Unit selection: - Func. diagram: 7240
Min Max Factory setting
1 9999 9999
p20207 DFR 1 run sequence / DFR 1 RunSeq
CU240D-2_DP
CU240D-2_PN
CU240D-2_DP_F
CU240D-2_PN_F
Access level: 3 Calculated: - Data type: Unsigned16
Can be changed: T Scaling: - Dyn. index: -
Unit group: - Unit selection: - Func. diagram: 7240
Min Max Factory setting
0 32000 560
p20208[0...1] BI: BSW 0 inputs / BSW 0 inputs
CU240D-2_DP
CU240D-2_PN
CU240D-2_DP_F
CU240D-2_PN_F
Access level: 3 Calculated: - Data type: U32 / Binary
Can be changed: T Scaling: - Dyn. index: -
Unit group: - Unit selection: - Func. diagram: 7250
Min Max Factory setting
- - 0