6. NORMAL GAIN ADJUSTMENT
6 - 18
(h) Initializing one-touch tuning
Clicking "Return to initial value" in the one-touch tuning window of setup software (MR
Configurator2
TM
) enables to return the parameter to the initial value. Refer to table 6.1 for the
parameters which you can initialize.
Clicking "Return to value before adjustment" in the one-touch tuning window of setup software (MR
Configurator2
TM
) enables to return the parameter to the value before clicking "Start".
When the initialization of one-touch tuning is completed, the following window will be displayed.
(returning to initial value)
To Next Page
Loading...