APPENDIX
App. - 14
App. 4.7 Transportation and storage
Transport the products correctly according to their mass.
Stacking in excess of the limited number of product packages is not allowed.
Do not carry the driver by the front cover during transportation. The product
may fall.
For detailed information on transportation and handling of the battery, refer to
app. 2 and app. 3.
Install the product in a load-bearing place of driver and servo motor in
accordance with the instruction manual.
Do not get on or put heavy load on the equipment.
Do not hold the cables, or connectors when carrying the driver. Otherwise, it
may drop.
When you keep or use it, please fulfill the following environment.
0 to 55 Class 3K3 (IEC/EN 60721-3-3)
-20 to 65 Class 2K4 (IEC/EN 60721-3-2)
-20 to 65 Class 1K4 (IEC/EN 60721-3-1)
Operation,
transportation, storage
10 Hz to 57 Hz with constant amplitude of 0.075 mm
57 Hz to 150 Hz with constant acceleration of 9.8 m/s
2
to IEC/EN 61800-5-1
(Test Fc of IEC 60068-2-6)
Class 2M3 (IEC/EN 60721-3-2)
Class 1M2 (IEC/EN 60721-3-2)
IP20 (IEC/EN 60529), Terminal block IP00
Max. 2000 m above sea level
Max. 10000 m above sea level
In regular transport packaging
To Next Page
Loading...
Need help?
General