(7) Reading program file (g)
Click "Open" to read the point table data.
(8) Saving program file (h)
Click "Save As" to save the program.
(9) Indirect addressing (i)
Click "Indirect addressing" to open the indirect addressing window. Refer to section 5.8.3 for details.
(10) Updating project (j)
Click "Update Project" to update the program to a project.
16.16.2 Window for program edit
You can create programs with the window for program edit.
(1) Program edit (a)
Input commands to the program edit area (a) in text format.
(2) Cutting text (b)
Select any text of the program edit area and click "Cut" to cut the selected text.
(3) Copying text (c)
Select any text of the program edit area and click "Copy" to copy the selected text to the clipboard.
To Next Page
Loading...