Input signal automatic on selection 3
Input signal automatic on selection 4
Input device selection 11L
Input device selection 11H
Input device selection 12L
Input device selection 12H
Output device selection 7
16.21.5 Extension setting 2 parameters ([Pr. PE_ _ ])
The following parameter cannot be used in the positioning mode.
[Pr. PE01 Fully closed loop function selection 1]
Fully closed loop function selection 1
Fully closed loop function selection 2
Fully closed loop control - Feedback pulse electronic gear 1
- Numerator
Fully closed loop control - Feedback pulse electronic gear 1
- Denominator
Fully closed loop control - Speed deviation error detection
level
Fully closed loop control - Position deviation error detection
level
Fully closed loop dual feedback filter
Fully closed loop function selection 3
To Next Page
Loading...
Need help?
General