15. SERVO MOTOR
15 - 5
15.2 Protection from oil and water
(1) Do not use the servo motor with its cable soaked in oil or water.
(2) If oil such as cutting oil drops on the servo motor, the sealant, packing, cable and others may be
affected depending on the oil type.
15.3 Cable
The standard motor and encoder cables routed from the servo motor should be fixed to the servo motor
to keep them unmovable. Otherwise, the cable may disconnect. In addition, do not modify the
connectors, terminals and others at the ends of the cables.
15.4 Rated speed of servo motor
The rated speed of servo motor (LE-T6-
□
, LE-T7-
□
, LE-T8-
□
, LE-T9-
□
) is 3000[r/min].
To Next Page
Loading...
Need help?
General