SMC Networks LECSB2-T Series User Manual

17 - 17
17．Positioning mode (pushing operation)
(2) Positioning mode Except during pushing operation of point table method
Input device (Note1)
Torque limit value status
Effective torque limit value
TL1
TL
CCW Power running・
CW Regeneration
CW Power running・
CCW Regeneration
0
0
Pr.PA11
Pr.PA12
0
1
TLA
>
Pr.PA11
Pr.PA12
Pr.PA11
Pr.PA12
Pr.PA11
Pr.PA12
>
TLA
TLA (Note2)
TLA (Note3)
1
0
Pr.PC35
>
Pr.PA11
Pr.PA12
Pr.PA11
Pr.PA12
Pr.PA11
Pr.PA12
>
Pr.PC35
Pr. PC35 (Note2)
Pr. PC35 (Note3)
1
1
TLA
>
Pr.PC35
Pr. PC35 (Note2)
Pr. PC35 (Note3)
Pr.PC35
>
TLA
TLA (Note2)
TLA (Note3)
Note1. 0: Off, 1: On
Note2. When [Pr. PD33] is set to "_ 2 _ _", it becomes [Pr. PA11].
Note3. When [Pr. PD33] is set to "_ 1 _ _", it becomes [Pr. PA12].
17.6.3 TLC (Torque limited)
Refer to section 3.6.1 (5) (c).

SMC Networks LECSB2-T Series Specifications

General

Brand	SMC Networks
Model	LECSB2-T Series
Category	DC Drives
Language	English