SMC Networks LECSB2-T Series User Manual

8. TROUBLESHOOTING
8 - 34
Alarm No.: 37
Name: Parameter error
Alarm content
・Parameter setting is incorrect.
・
Point table setting is incorrect.
Detail
No.
Detail name
Cause
Check method
Check result
Action
37.1
Parameter
setting range
error
(1)
A parameter was set
out of setting range.
Check the parameter
error No. and setting
value.
It is out of setting
range.
Check operation pattern.
It is within the setting
range.
Check (2).
(2)
A parameter setting
contradicts another.
Check the parameter
error No. and setting
value.
A setting value is
incorrect.
Review the filter setting.
A setting value is
correct.
Check (6).
(3)
The parameter setting
has changed due to a
driver
malfunction.
Replace thedriver, and
then check the
repeatability.
It is not repeatable.
Replace the driver.
37.2
Parameter
combination
error
(1)
A parameter setting
contradicts another.
Check the parameter
error No. and setting
value.
A setting value is
incorrect.
Correct the setting value.
(When the master-slave
function is set, also
check (2).)
37.3
Point table
setting error
(1)
The setting of point
tables is incorrect.
Check if the setting of
point tables is within
the setting range.
Check the parameter
error No. and point
table error No. with the
point table error No.
display on the display
of the driver. Or check
the setting value with
the point table display
of setup software (MR
Configurator2
TM
).
A setting value is
incorrect.
Correct the setting value.
A setting value is
correct.
Check (2).
(2)
A point table setting has
changed due to a driver
malfunction.
Replace the driver, and
then check the
repeatability.
It is not repeatable.
Replace the driver.

SMC Networks LECSB2-T Series Specifications

General

Brand	SMC Networks
Model	LECSB2-T Series
Category	DC Drives
Language	English