(5) Using together with other functions
Availability of other functions during the interrupt positioning is as follows:
S-pattern acceleration/deceleration
Roll feed display function
Mark detection function (current position latch
function)
: enabled, : disabled, : enabled with condition
Enabled only in a constant speed
ITP (Interrupt positioning) is available in the program method.
Because the interrupt positioning function with MSD (Mark detection) input signal is prioritized, the
interrupt positioning function with MSD (Mark detection) can be used during the interrupt positioning
function with ITP (Interrupt positioning). However, ITP (Interrupt positioning) cannot be used during the
interrupt positioning with MSD (Mark detection).
To Next Page
Loading...