Terex MHL360 E - Page 213

RECOVERY, LOADING AND TRANSPORT 6
MHL360 E 6.3
6.1.1.2 Diesel engine is running during
towing
►
Switch off the diesel engine, switch on the
ignition.
►
Switch through the gears about 10 times
using the function "Transmission control
(slow)" (237/4). The transmission control is
now pressureless. The gear is in neutral
position.
►
Switch off the ignition.
►
Unscrew the hoses (237/1) and (237/2) on
the transmission.
►
Seal the hoses and connections on the
transmission. Bind loosened hoses firmly to
the undercarriage.
►
Start the engine.
The transmission is now pressureless and
remains in neutral position with the engine
running.
After towing, the hoses must be reattached to
the transmission.
BSB50066
2
1
Fig. 237 Hose connections