ARM CoreLink GIC-600AE

Arm
®
CoreLink™ GIC-600AE Generic Interrupt Controller
Technical Reference Manual
Document ID: 101206_0003_04_en
Issue: 04
Functional Safety
fmu_err_in[x] && block ID Block
7 ITS3
8 ITS4
9 ITS5
10 ITS6
11 ITS7
12 PPI0
13 PPI1
14 PPI2
15 PPI3
16 PPI4
17 PPI5
18 PPI6
19 PPI7
20 PPI8
21 PPI9
22 PPI10
23 PPI11
24 PPI12
25 PPI13
26 PPI14
27 PPI15
28 PPI16
29 PPI17
30 PPI18
31 PPI19
32 PPI20
33 PPI21
34 PPI22
35 PPI23
36 PPI24
37 PPI25
38 PPI26
39 PPI27
40 PPI28
41 PPI29
42 PPI30
43 PPI31
fault_* signal connections for a non-GIC interconnect
There are some fault_* signals that are used only by a GIC rendered interconnect. Therefore, if a
non-GIC rendered interconnect is used, those fault_* signals must be tied off.
Copyright © 2018–2020, 2022 Arm Limited (or its affiliates). All rights reserved.
Non-Confidential
Page 231 of 268