Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1 - Rivets (2x)
2 - Seat ventilation unit
♦ Removing
– Remove the seat pan
⇒ page 342 .
– Remove the individual
rear seat ⇒ page 343 .
– Unplug the connector
-3-.
– Drill out the rivets -1-
(2x).
– Detach the seat ventila‐
tion unit -2-.
♦ Installing
– Install the seat ventila‐
tion unit -2- in the re‐
verse order of removal.
3 - Connector
4 - Padding
5 - Rubber guide
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
352 Rep. gr.72 - Seat frames
To Next Page
Loading...
