Audi A8 2003 - Page 363

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
3.20 Removing and installing rear left seat -V227- and rear right seat -V228- rake
adjustment motor
1 - Pin
2 - Spring lock washer
3 - Bolts (4x)
4 - Connector
5 - Rear left seat -V227- and
rear right seat -V228- rake ad‐
justment motor
♦ Removing
– Remove the seat pan
⇒ page 342 .
– Remove the individual
rear seat ⇒ page 343 .
– Unplug the connector
-4-.
– Use a hammer to knock
out the pin -1-.
– Unscrew the bolts -3-
(4x).
– Take out the angle ad‐
justment motor -5-.
♦ Installing
– Install the angle adjust‐
ment motor -5- in the re‐
verse order of removal.
– Secure the pin -1- with a
lock washer -2-.
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
3. Electrically operated individual rear seats 353