Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
♦ Upholstery clip pliers -V.A.G 1634-
WARNING
Heed the safety regulations for pyrotechnic components
⇒ page 94 .
1 - Awl -V.A.G 1636 A-
2 - Fastener
3 - Plastic clips
4 - Backrest frame
5 - Rubber elements (2x)
6 - Side fastening strips (6x)
7 - Upholstery clips (4x)
8 - Lower fastening strips (5x)
9 - Backrest heating connector
10 - Fastening strip
11 - Cover and padding
♦ Removing
– Remove the seat pan
⇒ page 342 .
– Remove the individual
rear seat ⇒ page 343 .
– Attach the holder for
seat repair -VAS 6136-
to the engine and gear‐
box holder -VAS 6095- .
– Attach the individual
rear seat to the holder
for seat repair -VAS
6136- .
– Remove the head re‐
straint ⇒ page 358 .
– Remove the head re‐
straint guides
⇒ page 382 .
– Use a screwdriver to
prise out the side fasten‐
ing strips -6- (6x).
– Unfasten the fastening
strip -10-.
– Pinch off the upholstery clips -7- (4x).
– Use a screwdriver to prise out the lower fastening strips -8- (5x).
– Unplug the connector -9-.
– Disengage the rubber element -5- on the left and right from the backrest frame -4-.
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
380 Rep. gr.74 - Seat - padding, covers
To Next Page
Loading...
