Cisco ASR 1004 Hardware Installation Guide

The following table lists the Cisco ASR 1000 Series Route Processor LEDs and behavior.
Table 10: Cisco ASR 1000 Series Route Processor LEDs
Behavior Description
Color —State
LEDLED Label
All power requirements
are within specification
Solid greenPowerPWR
Off, the router is in
standby mode.
Off
—
Cisco IOS software has
booted.
Solid greenSystem statusSTAT
ROMMON has
successfully loaded.
Yellow
—
System failure or during
boot process.
Red
—
Lit when the Cisco ASR
1000 Series RP is active.
GreenActiveACTV
Lit when the Cisco ASR
1000 Series RP is the
standby processor.
YellowStandbySTBY
Critical alarm indicator or
during boot process. An
example: the ambient air
temperature is above 60ºC
and will begin shutdown
in 5 minutes.
Solid RedCriticalCRIT
Major alarm indicator.
For example: Ambient air
temperature is beyond
short term operating range
of 55ºC. System will shut
down above 60ºC.
Solid RedMajorMAJ
Cisco ASR 1000 Series Router Hardware Installation Guide
40
Cisco ASR 1000 Series Routers Component Overview
Cisco ASR 1000 Series Route Processor Differences

Cisco ASR 1004 Specifications

General

Product Type	Router
Form Factor	Rack-mountable
Rack Height	2U
Forwarding Capacity	Up to 20 Gbps
Total Number of Ports	Varies by configuration
Number of Total Expansion Slots	4
Product Series	ASR 1000
Model	ASR 1004
Forwarding Performance	Up to 20 Gbps
Operating System	Cisco IOS XE
Power Supply	Dual
Route Processor	ASR 1000 Series Route Processor
Network Interface Modules	SFP, SFP+, Gigabit Ethernet, 10 Gigabit Ethernet
Interfaces/Ports	Varies by configuration
Expansion Slot Type	SPA
Throughput	20 Gbps
Redundancy	Power supply, Route Processor
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet, SFP, SFP+
Storage	Up to 64 GB Flash