102
Signal Mask
Video inputs can be used for mask signals instead of Box. Inputs used for masks must be
assigned to AUX5 to AUX8. Combined video signals such as program or multi-view cannot
be used.
(1) Open the [M/E1 KEY1 - MASK] menu PAGE 1. (See the previous page.)
(2) Turn F3 to select a mask signal.
(3) If you want to invert key signal, turn F4 to ON.
(4) Set TYPE to AND or OR.
ME1 KEY1: TYPE :BOX MSK:MASK(EXT/PST) : 1/5
MASK : =AND : =OFF : S=AUX5:INV=ON :
Preset Mask
WIPE patterns can be used for mask signals for KEY1 and KEY2.
(1) Open the [M/E1 KEY1 - MASK] menu PAGE 1. (See the previous page.)
(2) Turn F3 to select PRST (PRESET).
(3) If you want to invert key signal, turn F4 to ON.
(4) Set TYPE to AND or OR.
ME1 KEY1: TYPE :BOX MSK:MASK(EXT/PST) : 1/5
MASK : =AND : =OFF : S=PRST:INV=ON :
(5) Press PAGE DOWN to go to PAGE 3.
(6) Turn F1 to select a wipe pattern.
(7) Turn F4 to change the pattern shape.
ME1 KEY1:PATTERN : :LEVEL : 3/5
WIP PTRN: =51 : : =50.0 :
(8) Mask pattern can be modified using PAGE 4 and 5
ME1 KEY1: POSITION : ANGLE :ASPECT :4/5
WIP POS :X=0 Y=0 : =0.0 : =0.0 :
ME1 KEY1: MULTI : : 5/5
WIP MULT:X=1 Y=1 : :
To Next Page
