147
Overwriting Step 3
(1) Press SEQ EDIT to change the Keypad to SEQ EDIT
mode and display the [SEQ EDIT] menu.
(2) Press the page down button to go to PAGE 2. Verify
the current step.
(3) Turn F1 to select 3 at STEP in the menu or press
INC in the Keypad to go to Step 3.
SEQ EDIT: STEP : DUR : BREAK :BRK CTL: 2/3
STEP : = 3/ 4: =30 : =ON : =OFF :
Pressing INC and DEC in the Keypad moves between steps.
(4) Create "Video b" for saving Step 3.
(5) Press OVERWRITE(ENTER) in the Keypad to replace Step 3.
Playing Back the Sequence
Press +/- (PLAY) to play back and check the sequence contents.
Storing the Sequence
(1) Press SEQUENCE to display the [SEQUENCE MEMORY] menu.
(2) Press STORE. The [SEQUENCE STORE] menu appears, the current sequence
information is displayed and the Keypad is set to Sequence Store mode.
SEQUENCE:TOTAL STEP->4 :LOOP->ON : 1/1
STORE :TOTAL TIME->120 :DIR ->NOR :
(3) Press 1 .to store the current data in the working memory to "Sequence Memory 1."
Press ENTER
here.
SELECT / KEYPAD
5
2
RECALL
PASTE
4
1
6
3
DEC
SEQUENCEEVENTWIPE MACRO
CON TROL
MEMORY
MENU USER BUTTON COPY/SWAP SEQ EDIT
987
ATTACH
INC
MENU
COPY
STILL MATT
SWAP NEW
FILE
INS
KEY4KEY3KEY2KEY1
DETTACH
ADDDELCUTPLAY
+/-
CLE AR
WIPE
STOP
0
COPY
STO RE
ENTER
OVWR
To Next Page
Loading...
