FOR-A HVS-390HS - Page 26

26
 TALLY OUT circuit (Relay output)
 The maximum switching current for each output is 400 mA.
 The HVS-30TALR is a relay board. Use the supplied or commercially-prepared 37-pin
D-sub male connector (with #4-40 inch screws) for making a connection cable.
HVS-30TALR side
TALLY OUT
connector
VCC
COM.
VCC = 24 VDC
I
A
= 400 mA (max)
I
A
C.
RELAY
External device