28
WEB CONTROL
Playing Clips
(1) Click to select List 1 or 2 under CUE UP LIST. (The selected list will turn to yellow.)
(2) Click CUE UP to cue up the clip.
Pressing CUE UP(A) sets the time code value displayed on the left of CUE UP to the IN
point and the end of the clip to the OUT point.
Pressing CUE UP(B) sets the IN and OUT point values saved in the playlist to the IN and
OUT points.
(3) Click Play to play back the clip. (All VTR Controller functions are available.)
Changing CLIP ID and Deleting Clips (Not supported for HVS-5ECD)
>> Manual 25-6-3. "Changing CLIP ID and Deleting Clips"
Changing CLIP ID
(1)Click ID SET to pop-up the ID SELECT dialog box.
(2) Select a clip ID to be changed.
(3) Enter a new ID (name).
(4) Click RENAME to rename the clip.
(5) Click CLOSE to close the dialog.
Deleting Clips
(1)Click ID SET to pop-up the ID SELECT dialog box.
(2) Select a clip ID to be deleted.
(3) Click DELETE.
(4) A confirmation message will be displayed. Click OK to delete the clip.
(5) Click CLOSE to close the dialog.
To Next Page
Loading...
Need help?
General
