GE LOGIQ S7 Pro - Page 237

GE HEALTHCAREDRAFT LOGIQ™ S7 EXPERT/PRO
DIRECTION 5460683, REVISION 3 DRAFT (JUNE 25, 2014) SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-9
8-3-5-2-1-4 Connectivity - Recording the AE Title and Port settings
1.) From the touch panel, select Utility -> Connectivity -> Device.
2.) Select My Computer in the List of Devices, if not already selected.
Figure 8-2 Connectivity - Recording the AE Title and Port settings
3.) Record all settings in Table 8-5.
4.) Record all settings in Table 8-6.
Table 8-4 Record settings from WLAN screen
PARAMETER VALUE
NETWORK NAME (SSID)
NETWORK AUTHENTICATION
DATA ENCRYPTION
NETWORK KEY
KEY INDEX
Specify Yes/No to “The Key is
Provided Automatically”
IEEE 802.1x AUTHENTICATION
INFORMATION
EAP TYPE
Table 8-5 Record settings for My Computer from Device screen
Parameter Value
AE Title
Port Number
MAC Address
Table 8-6 Record settings for each device listed in Device table
Name IP Address